Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 3 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.

Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 5 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.

Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 7 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.

Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 9 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.*

RAIL M-LOK INCLINÉ À 45 DEGRÉS

Clawgear finally brings a versatile and lightweight low profile handguard to the Steyr AUG and same time also introduces M-LOK and Keymod platform to this weapon system. Sophisticated engineered and fully field tested for uncompromising fightability and operator-friendliness. Solid one piece construction, made of hard coated aluminium (Mil-8625-F type III, class II) for perfect combination of low weight and highest mechanical stability. The AUG M-LOK handguard features twelve mounting slots for limitless versatility and does not interfere with most silencers and muzzle devices. Compatibility:Steyr AUG A1/A2, AUG A3 SF, AUG P, AUG Z, AUG LMG variants, AUG SA variants, MSAR STG-556.Does not fit AUG A3, AUG Z A3, AUG 9mm variants

• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish

• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish

• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish

The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating

Picatinny Rail for M-LOK with QD mounting pointFeature List:• Picatinny Rail for M-LOK interface with 10 slots•Integrated QD mounting for Sling Swivel• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening if no Torque Wrench is avalible