G3/G36 SOF Compensator

G3/G36 SOF Compensator

Numéro d'article: 10579106000
Couleur: Black

En stock, livré sur France en 2-3 jours ouvrables

Trouver un revendeur local
Déterminer l'emplacement Ouvrir le Store Locator
Revendeurs à proximité de:
Aucun revendeur n'a pu être trouvé dans un rayon de 50km
Saisir l'adresse:

Description

Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding mater... en savoir plus

Caractéristiques et détails

Filetage du canon:
15mm CW

Dimensions et poids

Longueur:
5.9 cm
Longueur emballée:
14.6 cm
Largeur:
2 cm
Largeur emballée:
7.7 cm
Hauteur:
2 cm
Hauteur emballée:
6.4 cm
Poids:
0.08 kg
Poids emballé:
0.134 kg

Évaluations

0 de 0 Évaluations

Donnez votre avis !

Partagez votre expérience avec d'autres clients.

Produits intéressants

Produits intéressants

Clawgear AR-15 SOF Compensator
AR-15 SOF Compensator
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the AR-15 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: All AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28 TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15, etc. Does not fit Oberland Arms OA-15Installation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.
84,90 €

En stock

Filetage du canon: 1/2x28 TPI UNEF
Clawgear SG553 Blast Forward Compensator
SG553 Blast Forward Compensator
Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilitySwissArms SG553 with threaded barrelInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.Thread: M14x1 left
109,90 €

En stock

Filetage du canon: 14mm CCW
Clawgear G3/G36 Blast Forward Compensator
G3/G36 Blast Forward Compensator
Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Counter NutMount the G3/G36 BF Compensator with the counter nut to ensure a secure fit on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityH&K G36 and variants, H&K 416 and variants, OA-10, H&K G3 and variants with M15x1 muzzle threadInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.
109,90 €

En stock

Filetage du canon: 15mm CW
Vente
Clawgear OA-15 Blast Forward Compensator
OA-15 Blast Forward Compensator
Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the OA-15 Blast Forward Compensator with the crush washer to ensure the correct alignment on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityOberland Arms OA-15InstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear Logo faces upwards.
66,90 € 109,90 €

En stock

Filetage du canon: 14mm CW
Vente
Clawgear SG553 SOF Compensator
SG553 SOF Compensator
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any situation.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the SG553 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: SIG/Swiss Arms SG 553 with muzzle threadInstallation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.
47,90 € 79,90 €

En stock

Filetage du canon: 14mm CCW
Clawgear AK Two Chamber Compensator
AK Two Chamber Compensator
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Mounting NotchesTwelve mounting grooves allow the compensator to fit on any AK based weapon system.Closed BottomPrevents blown up dust and debris.Closed TopPrevents distraction in the line of sight.Compatibility: AK-47, AKM, RPK, AK-74 and all variants based on these models with 14x1 LH muzzle thread. Does not fit on AK-100 series, AKS-74U, Saiga riflesInstallation: Make sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the compensator counterclockwise on the barrel and push the locking pin on the front sight base completely flat. Screw thecompensator tight and release the locking pin into the next mounting notch available. Before using a silencer make sure the compensator is not moving at all.
84,90 €

En stock

Filetage du canon: 14mm CCW

Les clients ont aussi acheté

Les clients ont aussi acheté

Clawgear Mk.II Instructor Shirt
Mk.II Instructor Shirt
Le T-Shirt Instructor MK II développé pour vos formations et sessions de tir. Il est trés confortable et pratique. Nous avons conçu ce shirt unique et polyvalent pour répondre aux exigences de confort et de configuration utilitaire. De nombreuses particularités comme les poches et panneaux velcro sur les deux manches, poche intérieure de sécurité pour votre smartphone avec passe-câble pour écouteurs en feront votre T-Shirt préféré.
49,90 €

En stock

Vente
Clawgear Raider Mk.IV Pant
Raider Mk.IV Pant
Le pantalon Raider MK IV Pant a été conçu pour être un pantalon de mission simple et léger qui offre des options très utiles et plus de confort pour les combattants d'aujourd'hui. Il dispose d'un système de réglage de taille amélioré avec des composants élastiques pour un meilleur confort et une liberté de mouvement optimale. Le concept des poches a été optimisé ; poches cargo agrandies avec poches zip interne pour inclure un compartiment supplémentaire accessible de l'extérieur qui permet un accès rapide sur un chargeur de 30 coups standard.Une des modifications plus élaborées se trouve sur la zone de protection du genou, qui est maintenant équipée d'un réglage très pratique à l’intérieur. Le compartiment de la protection modulaire du genou permet l'utilisation d'une large gamme de pads différents et de différentes marques. Nous recommandons particulièrement les remarquables caractéristiques des TRUST HP de D3O disponibles en option. Ce pad peut être installé via les boutonnières qui ont été directement intégrées dans la conception du pantalon. La durabilité et la coupe confortable du Pantalon Raider Mk.IV le rendent adapté à toutes les missions sur le champ de bataille et au port quotidien. Zone de ceinture optimisée pour les ceintures Rigger et ceinturons de sécurité ainsi que pour les bretelles. Les poches frontales de cuisses permettent un accès rapide et facile, même avec des gants. La zone de protection du genou est équipée de tissu spécial permettant une absorption optimale de la transpiration. Fermetures éclair « YKK » et coutures recouvertes. Toutes les coutures principales sont triple-piqué pour une durabilité accrue.Excellent confort et coupe anatomiqueOptimisé pour l'utilisation de la ceinture Rigger et du ceinturon de sécuritéRéglage de la hauteur pour genouillèresCompartiments intégrés pour les genouillères (genouillères disponibles en option)Coutures principales triple-piquéesSignature infrarouge réduite
112,43 € - 142,43 € 149,90 € - 189,90 €

Majoritairement en stock

Clawgear Large Horizontal Utility Pouch LC
Large Horizontal Utility Pouch LC
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Large Horizontal Utility Pouch LC is made to extend storage space. External laser cutouts allow mounting various accessories.Features:Large Horizontal Utility PouchMade of 500D Nylon and bonded Laminate for extreme robustnessLaser cut MOLLEMOLLE system compatibleInternal flat pocketLow Profile designFabrics:500D Nylon bonded with NBR fabric500D NylonYKK ZipperDimensions:Height: 15cmWidth: 26cmDepth: 7cm
39,90 €

En stock

Vente
Clawgear Raider Mk.IV Field Shirt
Raider Mk.IV Field Shirt
À cause de la chemise Raider Mk.IV Field Shirt, nous avons dû demeurer sur le qui-vive pendant un certain temps parce que les exigences de différentes tâches opérationnelles et les opérateurs étaient souvent contradictoires les uns aux autres. Nous avons décidé d'opter pour les solutions les plus légères et les plus polyvalentes et les avons combinées avec les dernières avancées en matière d'ingénierie textile pour une performance et une polyvalence optimales dans des conditions de champ de bataille. La conception du manchon a été adoptée à partir de notre chemise Operator Combat Shirt et dispose d'une conception articulée ergonomique pour encore plus de confort et de liberté de mouvement. Comme d'habitude, nous attachons une grande importance à un haut degré de liberté de mouvement, à une fonctionnalité élevée et à un large éventail d'applications afin d'améliorer la capacité de combat de l'opérateur.Tissus durables avec un excellent toucherConception et construction légèresExcellent confort de port et coupe athlétiqueManches enroulables sans zipConcept de poche innovantEmplacement pour les insignes de gradePeut être équipée de la capuche Breacher Hood (disponible en option)Compartiments internes pour les coudières (disponibles en option)
44,93 € - 104,93 € 59,90 € - 139,90 €

En stock

Clawgear Edelweiss Patch
Edelweiss Patch
4,90 €

En stock

Clawgear Aviceda Mk.II Fleece Jacket
Aviceda Mk.II Fleece Jacket
Le but était de concevoir une couche intermédiaire très légère et polyvalente, qui se range facilement et en même temps sert d’une couche supérieure. Aviceda répond parfaitement à ces exigences. Le tissu polaire est extrêmement confortable à porter et respirant, n'absorbe pas l'humidité et est facile à ranger. Les poches avant et latérales offrent un accès facile et un stockage sécurisé. La coupe moderne confère un look attrayant et une grande liberté de mouvement.Facile à rangerSéchage rapide et respirantPoche intérieure avec guide-câble pour écouteursConfortable à porter
76,90 €

En stock