OA-15 Blast Forward Compensator

OA-15 Blast Forward Compensator

Numéro d'article: 10553006000
Couleur: Black

En stock, livré sur France en 2-3 jours ouvrables

Trouver un revendeur local
Déterminer l'emplacement Ouvrir le Store Locator
Revendeurs à proximité de:
Aucun revendeur n'a pu être trouvé dans un rayon de 50km
Saisir l'adresse:

Description

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this... en savoir plus

Caractéristiques et détails

Filetage du canon:
14mm CW

Dimensions et poids

Longueur:
5 cm
Longueur emballée:
14.6 cm
Largeur:
3 cm
Largeur emballée:
7.6 cm
Hauteur:
3 cm
Hauteur emballée:
6.4 cm
Poids:
0.0802 kg
Poids emballé:
0.151 kg

Évaluations

0 de 0 Évaluations

Donnez votre avis !

Partagez votre expérience avec d'autres clients.

Produits intéressants

Produits intéressants

Clawgear AR-15 SOF Compensator
AR-15 SOF Compensator
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the AR-15 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: All AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28 TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15, etc. Does not fit Oberland Arms OA-15Installation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.
84,90 €

En stock

Filetage du canon: 1/2x28 TPI UNEF
Clawgear SG553 Blast Forward Compensator
SG553 Blast Forward Compensator
Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilitySwissArms SG553 with threaded barrelInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.Thread: M14x1 left
109,90 €

En stock

Filetage du canon: 14mm CCW
Clawgear G3/G36 Blast Forward Compensator
G3/G36 Blast Forward Compensator
Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Counter NutMount the G3/G36 BF Compensator with the counter nut to ensure a secure fit on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityH&K G36 and variants, H&K 416 and variants, OA-10, H&K G3 and variants with M15x1 muzzle threadInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.
109,90 €

En stock

Filetage du canon: 15mm CW
Vente
Clawgear SG553 SOF Compensator
SG553 SOF Compensator
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any situation.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the SG553 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: SIG/Swiss Arms SG 553 with muzzle threadInstallation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.
47,90 € 79,90 €

En stock

Filetage du canon: 14mm CCW
Clawgear AK Two Chamber Compensator
AK Two Chamber Compensator
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Mounting NotchesTwelve mounting grooves allow the compensator to fit on any AK based weapon system.Closed BottomPrevents blown up dust and debris.Closed TopPrevents distraction in the line of sight.Compatibility: AK-47, AKM, RPK, AK-74 and all variants based on these models with 14x1 LH muzzle thread. Does not fit on AK-100 series, AKS-74U, Saiga riflesInstallation: Make sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the compensator counterclockwise on the barrel and push the locking pin on the front sight base completely flat. Screw thecompensator tight and release the locking pin into the next mounting notch available. Before using a silencer make sure the compensator is not moving at all.
84,90 €

En stock

Filetage du canon: 14mm CCW
Clawgear AR15 Starblast Compensator
AR15 Starblast Compensator
The Starblast compensator is the newest model of the CG Muzzle devices. It is a hybrid design of a muzzle brake and compensator.Outfitted with the Nato A2 standard interface to provide the option to mount any suppressor or blast deflector with the NATO QD mount(B&T Rotex V, Steyr UMS, or the Blast Deflector from B&T).Compatibility: All AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28 TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15,Steyr STM556 etc. Does not fit Oberland Arms OA-15
119,90 €

En stock

Les clients ont aussi acheté

Les clients ont aussi acheté

Clawgear Mk.II Instructor Shirt
Mk.II Instructor Shirt
Le T-Shirt Instructor MK II développé pour vos formations et sessions de tir. Il est trés confortable et pratique. Nous avons conçu ce shirt unique et polyvalent pour répondre aux exigences de confort et de configuration utilitaire. De nombreuses particularités comme les poches et panneaux velcro sur les deux manches, poche intérieure de sécurité pour votre smartphone avec passe-câble pour écouteurs en feront votre T-Shirt préféré.
49,90 €

En stock

Vente
Clawgear CIL Jacket
CIL Jacket
La veste CIL a été conçue comme une couche intermédiaire extrêmement légère, polyvalente et compacte qui offre d'excellentes performances. Le rembourrage Climashield Apex (67 gsm) est un matériau d'isolation thermique qui a été testé et utilisé dans le militaire. Cette veste résiste aux déchirures, évacue l'humidité. Elle est légère comme une plume et se range facilement dans un espace restreint.
79,90 € 129,90 €

En stock

Vente
Clawgear Raider Mk.IV Pant
Raider Mk.IV Pant
Le pantalon Raider MK IV Pant a été conçu pour être un pantalon de mission simple et léger qui offre des options très utiles et plus de confort pour les combattants d'aujourd'hui. Il dispose d'un système de réglage de taille amélioré avec des composants élastiques pour un meilleur confort et une liberté de mouvement optimale. Le concept des poches a été optimisé ; poches cargo agrandies avec poches zip interne pour inclure un compartiment supplémentaire accessible de l'extérieur qui permet un accès rapide sur un chargeur de 30 coups standard.Une des modifications plus élaborées se trouve sur la zone de protection du genou, qui est maintenant équipée d'un réglage très pratique à l’intérieur. Le compartiment de la protection modulaire du genou permet l'utilisation d'une large gamme de pads différents et de différentes marques. Nous recommandons particulièrement les remarquables caractéristiques des TRUST HP de D3O disponibles en option. Ce pad peut être installé via les boutonnières qui ont été directement intégrées dans la conception du pantalon. La durabilité et la coupe confortable du Pantalon Raider Mk.IV le rendent adapté à toutes les missions sur le champ de bataille et au port quotidien. Zone de ceinture optimisée pour les ceintures Rigger et ceinturons de sécurité ainsi que pour les bretelles. Les poches frontales de cuisses permettent un accès rapide et facile, même avec des gants. La zone de protection du genou est équipée de tissu spécial permettant une absorption optimale de la transpiration. Fermetures éclair « YKK » et coutures recouvertes. Toutes les coutures principales sont triple-piqué pour une durabilité accrue.Excellent confort et coupe anatomiqueOptimisé pour l'utilisation de la ceinture Rigger et du ceinturon de sécuritéRéglage de la hauteur pour genouillèresCompartiments intégrés pour les genouillères (genouillères disponibles en option)Coutures principales triple-piquéesSignature infrarouge réduite
112,43 € - 142,43 € 149,90 € - 189,90 €

Majoritairement en stock

Clawgear Austria Patch
Austria Patch
La série de patchs tissés de Clawgear présente une qualité exceptionnelle. Cette série est un retour à une solution éprouvée de la vieille école, mais réalisée avec un équipement de production dernier cri qui permet de créer un patch discret et léger, avec une résolution incroyablement élevée. Contrairement aux surfaces Velcro classiques, le Velcro utilisé pour cette série ne colle qu'aux surfaces velcro femelle « loop » et ne détruit pas les surfaces tricotées ou les fils à coudre de votre sous-vêtement.
7,90 € - 8,90 €

En stock

Clawgear Suisse Tab Patch
Suisse Tab Patch
La série de patchs tissés de Clawgear présente une qualité exceptionnelle. Cette série est un retour à une solution éprouvée de la vieille école, mais réalisée avec un équipement de production dernier cri qui permet de créer un patch discret et léger, avec une résolution incroyablement élevée. Contrairement aux surfaces Velcro classiques, le Velcro utilisé pour cette série ne colle qu'aux surfaces velcro femelle « loop » et ne détruit pas les surfaces tricotées ou les fils à coudre de votre sous-vêtement.
5,90 €

En stock

Clawgear Switzerland Tab Patch
Switzerland Tab Patch
La série de patchs tissés de Clawgear présente une qualité exceptionnelle. Cette série est un retour à une solution éprouvée de la vieille école, mais réalisée avec un équipement de production dernier cri qui permet de créer un patch discret et léger, avec une résolution incroyablement élevée. Contrairement aux surfaces Velcro classiques, le Velcro utilisé pour cette série ne colle qu'aux surfaces velcro femelle « loop » et ne détruit pas les surfaces tricotées ou les fils à coudre de votre sous-vêtement.
5,90 €

En stock