AK Blast Forward Compensator

AK Blast Forward Compensator

Numéro d'article: 10553106000
Couleur: Black

En stock, livré sur France en 2-3 jours ouvrables

Trouver un revendeur local
Déterminer l'emplacement Ouvrir le Store Locator
Revendeurs à proximité de:
Aucun revendeur n'a pu être trouvé dans un rayon de 50km
Saisir l'adresse:

Description

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this... en savoir plus

Caractéristiques et détails

Filetage du canon:
14mm CCW

Dimensions et poids

Longueur:
5 cm
Longueur emballée:
14.5 cm
Largeur:
3 cm
Largeur emballée:
7.6 cm
Hauteur:
3 cm
Hauteur emballée:
6.3 cm
Poids:
0.119 kg
Poids emballé:
0.119 kg

Évaluations

0 de 0 Évaluations

Donnez votre avis !

Partagez votre expérience avec d'autres clients.

Produits intéressants

Produits intéressants

Clawgear AR-15 SOF Compensator
AR-15 SOF Compensator
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the AR-15 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: All AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28 TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15, etc. Does not fit Oberland Arms OA-15Installation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.
84,90 €

En stock

Filetage du canon: 1/2x28 TPI UNEF
Clawgear SG553 Blast Forward Compensator
SG553 Blast Forward Compensator
Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilitySwissArms SG553 with threaded barrelInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.Thread: M14x1 left
109,90 €

En stock

Filetage du canon: 14mm CCW
Clawgear G3/G36 Blast Forward Compensator
G3/G36 Blast Forward Compensator
Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Counter NutMount the G3/G36 BF Compensator with the counter nut to ensure a secure fit on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityH&K G36 and variants, H&K 416 and variants, OA-10, H&K G3 and variants with M15x1 muzzle threadInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.
109,90 €

En stock

Filetage du canon: 15mm CW
Vente
Clawgear OA-15 Blast Forward Compensator
OA-15 Blast Forward Compensator
Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the OA-15 Blast Forward Compensator with the crush washer to ensure the correct alignment on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityOberland Arms OA-15InstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear Logo faces upwards.
66,90 € 109,90 €

En stock

Filetage du canon: 14mm CW
Vente
Clawgear SG553 SOF Compensator
SG553 SOF Compensator
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any situation.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the SG553 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: SIG/Swiss Arms SG 553 with muzzle threadInstallation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.
47,90 € 79,90 €

En stock

Filetage du canon: 14mm CCW
Clawgear AK Two Chamber Compensator
AK Two Chamber Compensator
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Mounting NotchesTwelve mounting grooves allow the compensator to fit on any AK based weapon system.Closed BottomPrevents blown up dust and debris.Closed TopPrevents distraction in the line of sight.Compatibility: AK-47, AKM, RPK, AK-74 and all variants based on these models with 14x1 LH muzzle thread. Does not fit on AK-100 series, AKS-74U, Saiga riflesInstallation: Make sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the compensator counterclockwise on the barrel and push the locking pin on the front sight base completely flat. Screw thecompensator tight and release the locking pin into the next mounting notch available. Before using a silencer make sure the compensator is not moving at all.
84,90 €

En stock

Filetage du canon: 14mm CCW

Les clients ont aussi acheté

Les clients ont aussi acheté

Clawgear AUG Modular Scope Mount
AUG Modular Scope Mount
Montage pour lunette de tir AUG modulaire. Les systèmes de montage modulaires de Clawgear sont conçus pour augmenter la performance et la précision de l'arme. Grâce à sa construction en polymère renforcé de fibres de verre, cet article robuste et de haute qualité vous servira dans toutes les situations de combat. Le Modular Scope Mount protège l'optique d'origine des fusils AUG et offre des possibilités de montage pour divers accessoires de base Picatinny.Rail OTAN STANAG 4694Le rail Picatinny à 16 fentes permet aux utilisateurs d’upgrader leurs fusil AUG avec divers dispositifs de visée ou accessoires.Construction LégèreMalgré sa légèreté, il n’empêche pas la résistance mécanique de ce montage grâce à l'utilisation de polymère renforcé de fibres de verre.Possibilités de MontageDes rails latéraux supplémentaires (vendus séparément) peuvent être fixés aux deux côtés de l'AUG MSM pour fournir des points de montage supplémentaires pour d'autres équipements.Signature Infrarouge RéduiteCette pièce d'accessoire est dotée d'une fonction infrarouge réduite.Couvercles RabattablesDeux couvercles rabattables (inclus) protègent les lentilles contre la pluie, la poussière, les débris et la boue.InstallationAssurer-vous que votre arme est déchargée et en sécurité.Prendre le demi-coque gauche (celle sans rail supérieur) et placer-la sur la lunette en la poussant sur la vis de fixation diagonale de la lunette. Ensuite, insérer le demi-coque droite dans les fentes correspondantes de la partie gauche jusqu'à ce qu'elle s'enclenche. Assurer-vous que tous les crochets d'engagement sont enclenchés. Placer chaque écrou hexagonal dans le jeu de la coque droite et serrer la vis correspondante de la coquille gauche côté. Monter les couvercles rabattables fournis pour protéger le verre d'origine.CompatibilitéSteyr AUG A1 / A2, AUG P, AUG Z, AUG LMG variantes, AUG SA variantes, F88 Austeyr. Compatible avec toutes les variantes avec une lunette standard Steyr 1,5x.
129,90 €

En stock