AUG PARTS

Two Chamber Muzzle Brake – M13x1 LH The Clawgear Two Chamber Muzzle Brake is a classic dual-chamber brake designed to significantly reduce recoil and improve weapon stability during rapid fire. It offers enhanced control and precision, making it ideal for dynamic shooting disciplines and tactical applications. Manufactured from high-strength steel, the brake features a closed bottom to prevent dust and debris from being kicked up during prone or low-angle firing. Its black, non-reflective hard coating ensures excellent resistance to thermal and mechanical stress. This variant is designed for Steyr AUG platforms with M13x1 LH muzzle thread. It is installed using the included locking nut, which ensures secure and accurate alignment along the bore axis. Technical Specifications TypeTwo-chamber muzzle brake MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) Mounting MethodLocking nut (included) ThreadM13x1 LH Caliber5.56 mm FeatureClosed bottom to reduce dust signature CompatibilitySteyr AUG and compatible platforms Length59 mm Diameter21.93 mm Weight85 g

Starblast Hybrid Compensator – M13x1 LH The Clawgear Starblast Hybrid Compensator combines the functions of flash hider, muzzle brake, and compensator in a single device. This hybrid design effectively reduces recoil and muzzle rise while suppressing flash. The result is improved weapon control during rapid follow-up shots and in tactical environments. Manufactured from high-strength steel, the compensator features structural cutouts for weight reduction. The matte, non-reflective surface finish supports use under varying light conditions. The A2-compatible interface allows direct attachment of standard NATO QD suppressors such as the B&T Rotex V, Steyr UMS, or B&T Blast Deflector. This variant is designed for weapons with an M13x1 left-hand thread – specifically optimized for the Steyr AUG. It uses the full thread length without a locking nut and ensures precise alignment to the bore axis, making it ideal for suppressor use. Technical Specifications TypeHybrid compensator (brake / compensator / flash hider) MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) InterfaceNATO A2 compatible (e.g. B&T Rotex V, Steyr UMS) Mounting MethodDirect thread installation without locking nut ThreadM13x1 LH Caliber5.56 mm CompatibilitySteyr AUG and compatible platforms

AUG A3 Top Rail The Clawgear AUG A3 Top Rail is a high-performance replacement for OEM rails on flat top AUG A3 receivers. Featuring a full-length 30-slot NATO STANAG 4694 Picatinny profile, it allows seamless integration of modern aiming devices such as LPVOs, red dot sights or magnifiers. Machined from high-strength 6061 aluminum and finished with a Mil-Spec Type III hard coat anodizing, the rail offers exceptional strength while keeping weight low. The matte, non-reflective coating minimizes unwanted glare. An anti-rotational QD sling attachment point is integrated at the front end of the rail. Note: This rail is required on certain AUG configurations to allow installation of the Clawgear AUG M-LOK Handguard. Technical Specifications TypePicatinny top rail PlatformSteyr AUG A3 (Flat Top Receiver) Material6061 aluminum, Mil-Spec Type III hard anodized FinishMatte black, non-glare Interface30-slot Picatinny (NATO STANAG 4694) Additional FeatureAnti-rotational QD sling mount (front section) Length443 mm Width21 mm Height22 mm Weight136 g ColorBlack (hard anodized)

Clawgear M-LOK Rail 45° – 3 Slot The 45° M-LOK Rail with three Picatinny slots is designed for users who aim to expand their weapon platform in a targeted and space-saving manner. It enables offset mounting of light modules, control units, or other accessories – without interfering with the primary handling area of the weapon.   A continuous opening within the Picatinny profile allows for protected and clean cable routing, especially when using wired switches or light systems. The integrated M-LOK interface offers additional expansion options and allows for flexible adaptation to various mission requirements. The included mounting screws feature a clamping surface coating, which supports easy positioning and secure installation on M-LOK handguards. Manufactured from high-strength aluminum and hard anodized according to MIL-8625-F Type III, Class II, the rail meets the highest standards of durability and corrosion resistance – even under demanding conditions. In combination with the AUG M-LOK Handguard by Clawgear, the rail can also serve as a compact heatshield – a practical additional feature for specific applications.   Technical Specifications – M-LOK Rail 45° Mounting typeM-LOK, 45° offset Length3 Picatinny slots MaterialHigh-strength aluminum FinishHard anodized, MIL-8625-F Type III, Class II Cable managementContinuous opening along the rail Included in deliveryM-LOK Rail 45°, 2 screws and M-LOK T-nuts each, hex key

SOF Compensator – AUG The Clawgear SOF Compensator for the Steyr AUG platform is specifically designed to meet the demands of modern armed forces. It enhances shooting stability by effectively reducing recoil and muzzle rise—ideal for rapid engagements and dynamic operations. The expansion chamber redirects exhaust gases upward and to the sides, while the closed bottom prevents dust signature during prone firing. The hardened steel breacher spikes at the front allow forced entry in CQB scenarios. The compensator is manufactured from high-strength steel with a corrosion-resistant hard coating. Secure attachment is achieved using the included counter nut. Installation involves screwing both the nut and the compensator counterclockwise onto the barrel. The compensator is then slightly rotated back for proper alignment, and the counter nut is hand-tightened and secured with a 19 mm wrench. The integrated NATO A2 interface allows compatibility with QD suppressors such as the B&T Rotex V or Steyr UMS. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHardened high-strength steel FinishCorrosion-resistant hard coating ThreadM13x1 LH (AUG standard) CompatibilitySteyr AUG A1/A2, A3, A3 SF, AUG P, AUG Z (threaded), AUG Z A3 (threaded), AUG LMG, AUG SA, MSAR STG-556, F88 Austeyr, Thales EF88/F90 FeaturesClosed bottom, expansion port geometry, breacher spikes, A2-compatible, mounted with counter nut InstallationScrew counter nut and compensator counterclockwise, align logo, tighten counter nut (19 mm wrench required)

Flip-Up Sight Set The Clawgear Flip-Up Sight Set is a folding mechanical sight system for weapon platforms with continuous Picatinny rails. It is in operational use with law enforcement and military users in multiple countries and was designed for maximum reliability, ruggedness, and ease of use. Both front and rear sights are precision-machined from high-strength steel and finished with a non-reflective, light-absorbing surface treatment. When folded, the sights sit low-profile and remain unobtrusive during transport or storage. They can be deployed quickly and adjusted without tools—elevation at the front, windage at the rear. Compatible with MIL-STD-1913 and STANAG 4694 rail systems, the set fits all standard platforms. Technical Specifications TypeMechanical flip-up sight (front and rear) PlatformMIL-STD-1913 / STANAG 4694 Picatinny MaterialHigh-strength, corrosion-resistant steel FinishNon-reflective, light-absorbing hard coating AdjustmentTool-free – front elevation, rear windage FunctionFolding, locking, low-profile when stowed CompatibilityAll common platforms with continuous Picatinny rail Dimensions & Weight ModelWeightLengthWidthHeight Front Sight59 g53 mm35 mm38.6 mm Rear Sight71 g46.5 mm38 mm40.5 mm

AUG SOF QD Sling Mount The Clawgear AUG SOF QD Sling Mount offers secure and reliable attachment points for quick-detach (QD) sling swivels. This set includes one front and one rear mounting point on the rifle, ensuring optimal weight distribution for improved ergonomics and weapon handling. Manufactured from hardened steel with a matte, non-reflective coating, this mount is built to withstand demanding operational environments. The streamlined and rounded design prevents snagging on gear and reduces the risk of injury during dynamic movement or when carrying the weapon. For best compatibility, the use of Clawgear QD Sling Swivels is recommended. Technical Specifications FunctionQD attachment points for sling swivels MaterialHardened steel FinishMatte black, corrosion resistant RotationFull 360° QD rotation DesignLow profile, rounded edges Mounting PointsFront and rear (set) CompatibilitySteyr AUG A1/A2, AUG A3, AUG A3 SF, AUG P, AUG Z, AUG LMG variants, AUG SA variants, F88 Austeyr, MSAR STG-556 Weight60 g ColorBlack (hard coated)

AUG M-LOK Handguard The Clawgear AUG M-LOK Handguard is designed for professional users who demand maximum modularity, low weight, and high durability on the AUG platform. Machined from high-strength aluminum and hard anodized to MIL-8625-F Type III, Class II, it offers outstanding structural integrity while remaining lightweight – ideal for operational use under harsh conditions. With full M-LOK compatibility across 12 mounting positions, the handguard supports mission-specific accessories such as vertical grips, lights, IR modules, and lasers. Its slim, ergonomic design improves weapon control and remains fully functional when used in combination with suppressors, compensators, or flash hiders. For flat top AUG configurations, the Clawgear AUG A3 Top Rail is required to ensure full compatibility. Technical Specifications TypeFree-floating handguard Material6061 aluminum, MIL-8625-F Type III, Class II hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible, 12 mounting slots ErgonomicsOne-piece low-profile design for enhanced control Length138.4 mm Width56 mm Height47 mm Weight142 g ColorBlack (hard anodized) CompatibilitySteyr AUG A1/A2, AUG A3 SF, AUG P, AUG Z, AUG SA, AUG LMG, MSAR STG-556Not compatible with: AUG A3, AUG Z A3, AUG 9mm, AUG A3 SA POLICE/SWAT