AK PARTS

Starblast Flash Hider The Clawgear Starblast Flash Hider was specifically developed for tactical use under low-light conditions. Unlike muzzle brakes, which primarily reduce recoil, this device is focused on effectively suppressing muzzle flash. This significantly reduces the shooter’s visual signature and makes detection more difficult – especially on short-barreled rifles where flash intensity is typically high. The design features weight-optimizing cutouts that ensure maximum durability with minimal weight. The Starblast series is equipped with a NATO A2-compatible interface and is engineered to align concentrically with the bore axis, enabling precise and repeatable use with suppressors. These characteristics make it ideally suited for modern operational profiles in military and law enforcement environments. Technical Specifications TypeFlash Hider InterfaceNATO A2-compatible MaterialHigh-strength steel FinishHard-coated to MIL standards FeaturesWeight-optimized cutouts, short-barrel optimized, suppressor compatible ApplicationMilitary, law enforcement, tactical use

Starblast Hybrid Compensator – M14x1 LH The Clawgear Starblast Hybrid Compensator combines the functions of flash hider, muzzle brake, and compensator in a single device. This hybrid design effectively reduces recoil and muzzle rise while suppressing flash. The result is improved weapon control during rapid follow-up shots and in tactical environments. Manufactured from high-strength steel, the compensator features structural cutouts for weight reduction. The matte, non-reflective surface finish supports use under varying light conditions. The A2-compatible interface allows direct attachment of standard NATO QD suppressors such as the B&T Rotex V, Steyr UMS, or B&T Blast Deflector. This variant features an M14x1 LH thread with positioning notches for proper timing and alignment on AK platforms. It is compatible with AK47, AKM, RPK, AK-74, and related variants. Not compatible with AK-100 series, AKS-74U, or Saiga rifles. Technical Specifications TypeHybrid compensator (brake / compensator / flash hider) MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) InterfaceNATO A2 compatible (e.g. B&T Rotex V, Steyr UMS) Mounting MethodWith positioning notches for AK alignment ThreadM14x1 LH Caliber7.62 mm CompatibilityAK47, AKM, RPK, AK-74 and related platforms (not for AK-100, AKS-74U, Saiga)

Blast Forward Compensator – AK47 The Clawgear Blast Forward Compensator (BFC) is a linear muzzle device designed to reduce side-blast, gas exposure, and muzzle flash. Specifically engineered for AK-based systems with 14x1 LH thread, it directs muzzle gases forward—improving weapon control in confined spaces, CQB environments, or team-based operations. Three internal expansion chambers help mitigate recoil and muzzle rise. The closed-body design minimizes dust signature when shooting from prone positions. Integrated hardened steel breacher spikes offer additional functionality for forced entry. Twelve mounting notches ensure secure alignment on all common AK platforms. Technical Specifications TypeLinear Blast Forward Compensator MaterialHardened high-strength steel FinishBlack, corrosion-resistant coating Expansion Chambers3 internal chambers Breacher SpikesIntegrated, hardened steel MountingVia locking pin and alignment notches Thread14x1 LH Caliber7.62 x 39 mm / 5.45 x 39 mm CompatibilityAK-47, AKM, RPK, AK-74 and all variants with 14x1 LH thread; not compatible with AK-100 series, AKS-74U, Saiga rifles

AK47 Short Slick Handguard M-LOK The Clawgear AK47 Short Slick Handguard is the most compact model in the modular handguard series for AK platforms with stamped or milled receivers. It is designed for applications that require low weight, a short front-end profile, and enhanced weapon maneuverability – such as CQB environments or confined operational spaces. Machined from high-strength 6061 aluminum and hard anodized to MIL-SPEC Type III, the handguard offers excellent durability with minimal weight. The matte, non-glare surface reduces unwanted reflections. The integrated M-LOK system allows mounting of various accessories such as Picatinny rails, vertical grips, or lighting tools. A QD sling attachment point is integrated into the rear section. The shortened design reduces overall weapon weight and front-end load, making it ideal for fast target acquisition and dynamic shooting situations. Technical Specifications TypeFree-floating handguard PlatformAK47 (compatible with stamped and milled receivers) Material6061 aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible Additional FeaturesQD sling attachment point (rear section) ColorBlack (hard anodized) Length160 mm Weight160 g

AK Pistol Grip The Clawgear AK Pistol Grip is a modern tactical upgrade for the classic AK47-style grip. Constructed from fiber-reinforced polymer, it offers enhanced ergonomics, structural durability, and mission-oriented features tailored for professional users operating in demanding environments. An integrated storage compartment with tool-free access allows secure storage of small items such as batteries, cleaning tools, or adjustment aids—ideal for field use where quick access is essential. The textured surface ensures a slip-resistant grip, even in wet conditions or while wearing gloves. Its optimized angle and compact form factor improve weapon handling and target control. Installation is straightforward using the included stainless steel mounting screw. The Clawgear AK Pistol Grip is a lightweight, robust enhancement for any AK/AKM platform—engineered for reliability under real-world operational demands. Technical Specifications TypePistol grip with integrated storage PlatformAK47 / AKM / compatible derivatives MaterialFiber-reinforced polymer SurfaceTextured, non-slip Storage CompartmentIntegrated, tool-free access InstallationStainless steel mounting screw (included) ColorBlack Length93 mm Width31 mm Height107 mm Weight66 g

Two Chamber Muzzle Brake – M14x1 LH The Clawgear Two Chamber Muzzle Brake is designed specifically for AK platforms and features a dual-chamber layout to effectively reduce recoil and improve weapon stability. It enhances control during rapid fire and supports consistent shot placement. Machined from high-strength steel and finished with a matte black hard coating, it withstands extreme thermal and mechanical stress. The closed bottom minimizes dust signature during prone shooting, while the closed top prevents distraction in the line of sight. It is fully compatible with B&T QD suppressors such as the Rotex-V. This version features an M14x1 LH thread and twelve timing notches for secure indexing on AK platforms. Installation is done by threading counterclockwise and locking the device into the next available notch using the front sight detent pin. Not compatible with AK-100 series, AKS-74U, or Saiga rifles. Technical Specifications TypeTwo-chamber muzzle brake MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) Mounting MethodM14x1 LH with timing notches ThreadM14x1 LH Caliber7.62 mm FeaturesClosed bottom and top, compatible with B&T QD suppressors CompatibilityAK47, AKM, RPK, AK-74 and variants (not for AK-100, AKS-74U, Saiga) Length59 mm Diameter21.93 mm Weight85 g

SOF Compensator – M14x1 LH The Clawgear SOF Compensator is specifically designed for AK platforms with M14x1 LH muzzle threads. It reduces recoil and muzzle rise to improve control and precision during rapid fire—ideal for dynamic operations and professional use in CQB scenarios. The expansion chamber directs gases upward and to the sides to stabilize the weapon, while the closed bottom prevents dust signature during prone shooting. The front is equipped with integrated breacher spikes made of hardened steel for forced entry tasks. The body is constructed from high-strength steel with a corrosion-resistant hard coating. Featuring twelve locking notches, the compensator is compatible with most AK-type front sight bases. Installation is done by screwing the device counterclockwise onto the barrel and engaging the retaining pin. Before using a suppressor, ensure the compensator is fully seated and does not move. The integrated NATO A2 interface supports QD suppressors such as the B&T Rotex V. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHardened high-strength steel FinishCorrosion-resistant hard coating ThreadM14x1 LH CompatibilityAK47, AKM, RPK, AK-74 and derivatives with M14x1 LH thread (not compatible with AK-100, AKS-74U, Saiga) FeaturesClosed bottom, expansion port geometry, breacher spikes, A2-compatible, 12 locking notches InstallationScrew on counterclockwise, engage front sight base detent pin

AK47 Gas Tube Cover The Clawgear AK47 Gas Tube Cover is a functional enhancement for use exclusively with the Clawgear AK Slick Handguard. It protects the gas tube while adding a MIL-STD 1913 / STANAG 4694 Picatinny top rail, enabling the mounting of IR devices, lights, or backup sights in line with the bore. Manufactured from high-strength aluminum and MIL-SPEC Type III hard anodized, this cover offers maximum durability with minimal weight. The matte black finish reduces unwanted reflections, supporting tactical use in variable lighting conditions. Mounts securely with guided fit when combined with the Clawgear AK Slick Handguard. Note: This component is only compatible with the Clawgear AK Slick Handguard. It cannot be used standalone. Technical Specifications TypeGas tube cover with Picatinny top rail MaterialHigh-strength aluminum, MIL-SPEC Type III hard anodized FinishMatte black, anti-reflective, corrosion resistant Mounting InterfacePicatinny (MIL-STD 1913 / STANAG 4694), top CompatibilityOnly usable with Clawgear AK Slick Handguards Weight80 g Length100 mm Width34.6 mm Height37.5 mm

AK47 Medium Slick Handguard M-LOK The Clawgear AK47 Medium Slick Handguard is the mid-length version of the modular handguard series for AK platforms with stamped or milled receivers. It provides a balanced combination of mounting space, structural stability, and overall weight, making it ideal for users seeking both versatility and weapon handling performance. Machined from high-strength 6061 aluminum and MIL-SPEC Type III hard anodized, the handguard offers excellent durability with reduced weight. The matte, non-reflective surface minimizes light signature. The integrated M-LOK system enables direct attachment of accessories like Picatinny rails, grips, or lights. A QD sling mounting point is integrated into the rear section. This medium-length version offers an ideal compromise between maneuverability and accessory mounting area—suitable for both tactical and dynamic shooting applications. Technical Specifications TypeFree-floating handguard PlatformAK47 (compatible with stamped and milled receivers) Material6061 aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible Additional FeaturesQD sling attachment point (rear section) ColorBlack (hard anodized) Length263 mm Weight250 g

AK47 Rear Sight Mount The Clawgear AK47 Rear Sight Mount is a precision upgrade for AK platforms with a standard rear sight base. It replaces the original iron sight and enables direct mounting of modern aiming solutions such as red dot or holographic optics. An integrated backup sight takes over the role of the original rear sight and ensures continued use of the rifle even without optics. Manufactured from MIL-SPEC Type III hard-anodized aluminum, the mount features a 9-slot Picatinny interface (NATO STANAG 4694) and offers high strength in a lightweight design. The contoured underside perfectly matches the receiver cover, allowing field-stripping of the rifle even when the mount is installed. Three adjustment screws enable precise alignment with the bore axis. Technical Specifications TypeOptic mount with integrated backup sight Mounting SystemPicatinny Rail (9 Slots, NATO STANAG 4694) MaterialHigh-strength aluminum, hard-anodized (MIL-SPEC Type III) FunctionReplaces factory rear sight, includes fine adjustment screws Backup SightIntegrated, usable with or without optic CompatibilityAK47, AKM, RPK, AK74 and similar platforms with Mauser-style rear sight Not CompatibleSKS rifles Weight55 g Length110 mm Width19.7 mm Height21.2 mm

AK47 Long Slick Handguard M-LOK The Clawgear AK47 Long Slick Handguard is the longest version in the modular series for AK platforms with stamped or milled receivers. Designed for users who require maximum accessory mounting space and extended grip options, it is ideal for precision shooting techniques and tactical applications. Machined from high-strength 6061 aluminum and MIL-SPEC Type III hard anodized, the handguard delivers exceptional durability and dimensional accuracy. Its matte, non-glare finish helps reduce unwanted reflections. The integrated M-LOK system enables secure mounting of Picatinny segments, lights, and vertical grips. A QD sling mount is integrated at the rear section. This extended-length variant provides maximum flexibility for accessory layout and modern shooting techniques without compromising weapon balance. Technical Specifications TypeFree-floating handguard PlatformAK47 (compatible with stamped and milled receivers) Material6061 aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible Additional FeaturesQD sling attachment point (rear section) ColorBlack (hard anodized) Length383 mm Weight292 g