Made of high strength aluminum with Mil-Spec Type III hard coat anodized finishFeatures a non-glare coating to reduce reflectionsMakes the A3 rifle compatible with the Clawgear AUG HandguardFeatures a 30 slot picatinny rail (NATO STANAG 4694)Anti-rotational QD attachment point at the front
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe nine slot Picatinny rail allows the user to upgrade his AK rifle with various aiming devices or accessories.Adjustment ScrewsAdjust the angle of the mount to align it with the point of bullet impact.Shaped ContourThe design fits to the curve on the receiver cover and even allows to dissable the rifle without dismounting the AK RSM.Emergency SightEven with an optical device mounted the sight can be used as a backup.Compatibility: AK-47, AKM, RPK, AK-74 and all variants with the original Mauser-type adjustable rear sight. Not compatible with SKS rifles.Installation: Dismount the existing rear sight and leaf spring. Put the AK RSM into the guidance on the rear sight base and align both holes. Punch the included roll pin into the bore so it is flush with both sides. Insert the big set screw on top into the middle thread on the rail and tighten it until the emergency sight aims to the point of impact. Finally insert both small set screws into the forward threads and tighten them stoutly. Warning: Torque for setscrew max. 3 NM
Clawgear‘s modular mounting system products are designed to increase weapon performance and handling. Due to it‘s construction in 6082 Aluminum, this rugged and high quality item will serve you in any combat situation.NATO STANAG 4694 RAILThe 13 slot Picatinny Rail allows the user to upgrade his 55X rifle with various aiming devices or accessories.LIGHTWEIGHT CONSTRUCTIONAlthough this mount base has been designed in a lightweight way, its mechanical strength is not being affected.ADJUSTMENT SCREWIt clamps the mount for a solid fit between both attachment points on the receiver and is secured by a clamp screw on the left side.DOVETAIL SLOTThe front attachment point is the dovetail on the receiver which is normally used to fix the brass catcher.CompatibilitySIG550, SIG551, SIG552, SIG553, PE90 and all variants of the rifle with standard adjustable diopter sights.InstallationMake sure your weapon is unloaded and safe. Screw the included adjustment screw fully into the mount base. Put the rail on the upper receiver and slide it forward so the dovetail on the receiver connects smoothly to the front of the rail. Then use a 8mm wrench to unscrew the adjustment screw until it moves inside the hole of the rear sight base. Tighten it up for a solid fit. Use the clamp screw on the left side of the mount base to secure its position.
Clawgear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe 10 slot Picatinny rail allows the user to upgrade his Modular Scope Mount equipped AUG rifle with additional accessories.SurfaceHigh alloy aluminium with anodized coating (MIL-8625-F type III, class II) for heavy use.This rails fits the AUG Modular Scope Mount (Art.Nr. 20114)
The Operator Combat Shirt was developed as a tailor-made solution for a European special forces unit. We combined the wishes and suggestions expressed with the latest findings in fabric production and textile design. The result was subjected to intensive operational testing, further refined and then successfully procured. Due to the impressive feedback and the procurement by other special operations forces, we have decided to include this product in our regular range.This combat shirt, specially tailored for use in combination with ballistic protective waistcoats, has a very body-hugging cut, which ensures a high level of wearing comfort. The shoulder area has been designed to be seamless, which prevents uncomfortable pressure points when wearing rucksacks, plate carriers and chest rigs. The sleeves and upper arm pockets have been completely redesigned and have an ergonomic design adapted to the contours of the body for better wearing comfort and mobility.The flame-retardant knitted fabric has been further developed compared to the previous model and now has an even better performance in terms of moisture management and sweat absorption, but at the same time the robustness has been further increased. The lightness as well as the anti-microbial and flame-retardant properties remain unaffected. The results achieved in the certification according to EN ISO 14116 with an after-flame time and after-glow time of 0 seconds each are the best possible values that can be achieved at all.In contrast to polyester and nylon, the fabric used does not melt under the influence of high temperatures or flames. As the materials used are inherently flame retardant, the flame retardant effect remains permanently and cannot wash out. The wicking effect of the fabric allows moisture to be efficiently transported to the outside, and the fine surface also ensures a sense of well-being throughout use. In this way, we efficiently counteract a frequently underestimated core risk and at the same time ensure very good performance and a high level of comfort.Intensively field tested and proven in use with special forcesCrew-up sleeve ends without zipsCollar with integrated zipCan be equipped with a Breacher Hood (optionally available)Spacious upper arm pocketsRobust Mil Spec fabrics with excellent wearing comfortTorso area made of flame-retardant knitted fabric, complies with EN ISO 14116Extralong torso to prevent slipping out of the trousersFast drying and breathableEfficiently transports moisture to the outsideAthletic cutInternal pockets for elbow pads (optionally available).
The Mk.II Operator Combat Pant is the result of a close co-operation with various SOF operators and sets the focus on its fit and versatility. The addition of stretchable elements massively exceeds the mobility of the operator and makes movements incredibly smooth. The trousers have many proven features such as a waist-adjust system or the sophisticated knee section with internal height adjustment, but also many newly developed features such as the integrated stretch areas, an improved pocket concept and a completely new tailoring.Excellent wearing comfort and great freedom of movement due to stretch elements and innovative cutOptimized for safety & rigger belts useAdjustable knee-heightIntegrated knee pad compartments (knee pads are available optionally)Triple stitched main seamsReduced infrared signature
Raider Mk.IV Field Shirt kept us on our toes for quite a while because the requirements from different operational tasks and operators were often contradictory to each other. We decided to go for the lightest and most versatile solutions and combined them with latest textile engineering advancements for best performance and versatility under battlefield conditions. The sleeve design has been adopted from our Operator Combat Shirt and feature articulated ergonomic design for even better comfort and mobility. As usual, we have attached great importance to a high degree of freedom of movement, high functionality and a wide range of applications to enhance the operator's fightability.Durable mil spec fabrics with great handfeelLightweight design and constructionExcellent wearing comfort and athletic fitRollable sleeve ends without zipInnovative pocket conceptFlap for rank insigniaCan be equipped with Breacher Hood (available optionally)Internal compartments for elbow pads (available optionally)
Very versatile soft shell jacket, ideal for autumn and winter temperatures with warming fleece surface on the inside. Durable Water repellent and extremely breathable. Sturdy nylon fabric with great handfeel and performance. The seam-free shoulder area eases rucksack carriage without pressure points and prevents intrusion of wetness. Wind deflector prevents cold air to get inside through the zipper.Extremely breathableWater repellent sewing yarnWind deflector for better insulationInnovative low profile pocket conceptComfortable & durable Water repellent stretch fabric
Rapax is an extremely breathable and uncompromising light build with low stowage volume for a wide range of tactical applications as well as everyday carry. The seam-free shoulder area eases rucksack carriage without pressure points and prevents intrusion of wetness. Wind deflector prevents cold air to get inside through the zipper. Adjustable waist adjustment straps provide a close-fitting and functional waist design. Designed for medium temperature ranges, but can well be combined with a warm layer for temperatures below freezing.Extremely breathableWater repellent sewing yarnWind deflector for better insulationInnovative low profile pocket conceptComfortable & durable water repellent fabric