Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Rear End Kit Snap Hook is designed for Clawgear slings or other utilizing a 25mm webbing loop. This rear end kit has a steel snap hook for attaching to various sling swivels or loops. The Snap Hook is covered with an elastic webbing collar to prevent weapon from scratching.Features:Designed for Clawgear 2-point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of bonded Laminate for extreme robustnessSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingFabrics:500D Nylon bonded with NBR fabricITW Nexus 30mm plastic loopSteel Snap HookDimensions:Length: 11cmWidth: 3cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Paracord is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has a fixed military grade paracord loop for direct attachment.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of Nylon webbing in conjunction with military grade ParacordPlastic buckle attachmentFabrics:Nylon WebbingITW Nexus 30mm plastic loopType III 550 ParacordDimensions:Length: 24cmWidth: 3cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Snap Hook is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has a fixed Snap Hook.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of 500D Nylon and bonded Laminate for extreme robustnessSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingPlastic buckle attachmentFabrics:500D Nylon bonded with NBR fabricITW Nexus 25mm female buckleSteel Snap HookDimensions:Length: 11cmWidth: 3cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Rear End Kit Paracord is designed for Clawgear slings or other utilizing a 25mm webbing loop. This rear end kit has a military grade paracord loop for attaching to various sling swivels or loops.Features:Designed for Clawgear 2-point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of Nylon webbing in conjunction with military grade ParacordFabrics:Nylon WebbingITW Nexus 30mm plastic loopType III 550 ParacordDimensions:Length: 24cmWidth: 3cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Loop is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has an adjustable 25mm webbing loop for attaching various sling swivels or hooks.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of Nylon webbingMounting Loop size adjustablePlastic buckle attachmentFabrics:32mm Nylon WebbingITW Nexus 25mm female buckleDimensions:Length: 10cm+ (adjustable)Width: 3cm

Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe nine slot Picatinny rail allows the user to upgrade his AK rifle with various aiming devices or accessories.Adjustment ScrewsAdjust the angle of the mount to align it with the point of bullet impact.Shaped ContourThe design fits to the curve on the receiver cover and even allows to dissable the rifle without dismounting the AK RSM.Emergency SightEven with an optical device mounted the sight can be used as a backup.Compatibility: AK-47, AKM, RPK, AK-74 and all variants with the original Mauser-type adjustable rear sight. Not compatible with SKS rifles.Installation: Dismount the existing rear sight and leaf spring. Put the AK RSM into the guidance on the rear sight base and align both holes. Punch the included roll pin into the bore so it is flush with both sides. Insert the big set screw on top into the middle thread on the rail and tighten it until the emergency sight aims to the point of impact. Finally insert both small set screws into the forward threads and tighten them stoutly. Warning: Torque for setscrew max. 3 NM

Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsFits Slings with 1.25 Inch webbingBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear

Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsFits Slings with 1.00 Inch webbingBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear

• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish

Attachement Point for Rifle Slings with QD-Sling SwivelCompatibele for Picatinny RailsLow profile design with tapered corners to not interfear while handling and minimis the Risk of snagging on gearSolid metal construction with black coating for increased durability360 Degrees rotabelImportant:We recoment the use of high quality brands QD Sling Swivels to maximise the compability of the different parts.A check after mounting of the QD Sling swivel that it is really locked is critical and can be done with a quick pull and twist. With this check it can be confirmed that no dirt or debree is traped or damage is in the locking area.

The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating