Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the AR-15 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: All AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28 TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15, etc. Does not fit Oberland Arms OA-15Installation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilitySwissArms SG553 with threaded barrelInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.Thread: M14x1 left

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Counter NutMount the G3/G36 BF Compensator with the counter nut to ensure a secure fit on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityH&K G36 and variants, H&K 416 and variants, OA-10, H&K G3 and variants with M15x1 muzzle threadInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.

Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Mounting NotchesTwelve mounting grooves allow the compensator to fit on any AK based weapon system.Closed BottomPrevents blown up dust and debris.Closed TopPrevents distraction in the line of sight.Compatibility: AK-47, AKM, RPK, AK-74 and all variants based on these models with 14x1 LH muzzle thread. Does not fit on AK-100 series, AKS-74U, Saiga riflesInstallation: Make sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the compensator counterclockwise on the barrel and push the locking pin on the front sight base completely flat. Screw thecompensator tight and release the locking pin into the next mounting notch available. Before using a silencer make sure the compensator is not moving at all.

Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any situation.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the SG553 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: SIG/Swiss Arms SG 553 with muzzle threadInstallation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the OA-15 Blast Forward Compensator with the crush washer to ensure the correct alignment on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityOberland Arms OA-15InstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear Logo faces upwards.

The Raider Mk.IV mission pant has been designed to be simple and lightweight assault pants, featuring extremely useful extras and greatest possible comfort for today's war fighters. It features an improved waist adjustment system with elastic components for better comfort and absorption of body movements. The pocket concept has been optimized; cargo pockets have been extended with an an additional compartment which is accessible from outside and holds a 30rds magazine for rapid access. Profound modifications apply to the knee area which is now equipped with a handy inward knee height adjustment. The modular knee pad compartment allows the use of a wide range of different knee pad inserts from different brands. We particularly recommend the optionally available TRUST HP from D3O which features outstanding knee protection. This pad can be installed via the the button holes which have been integrated for this reason into the pant conception.The Raider Mk.IV Pant's durability and body fit makes this it suitable for all battlefield missions and every day carry as well. The belt area is optimized for rigger & safety belts as well as for suspenders. Front Pockets allow fast and easy access also with gloves. Cargo Pockets provide a lot of space for your equipment and also include an extra zip-pocket. The inside knee area is equipped with a special fabric to provide optimum sweat absorption. 'YKK' zippers and 'Amann' sewing threads have been processed, all main seams are triple stitched for extra durability.Outstanding wearing comfort and anatomic fitOptimized for safety & rigger belts useAdjustable knee-heightIntegrated knee pad compartments (knee pads are available optionally)Triple stitched main seamsReduced infrared signature

The Instructor Shirt has been developed for use at shooting ranges and training facilities. We designed this unique shirt to fulfil requirements of comfort and utilitarian configuration. The Instructor Shirt is exceptionally versatile in its capacities. It features velcro mounting points and zip pockets on both sleeves. A hidden side pocket for mobile phone including cable outlet has also been included.

In the CIL we have conceived an extremely light and versatile warm layer with excellent performance and low stowage requirement. Climashield Apex (67 gsm) is a insulation material which has been well tested and used militarily. This feather light material has a high resistance to tearing, good moisture transfer qualities and can still be packed in a tiny space.Ultra light design for maximum performanceClimashield Apex (67 gsm) insulationElastic cuffs on armsRoomy front pocketsFolds into its own envelopeShell is made of low noise micro rip stop nylon fabric

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.