AK47 Gas Tube Cover
AK47 Gas Tube Cover
Item number: 11285506000
In stock, delivered to United Kingdom in 3-5 working days
Your wish lists
Loading...
Will be loaded...
No dealers could be found within a radius of 50km
Enter address:
%place%
Description
The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cov... show more
Features & Details
- Rail system:
- Picatinny Rail
Dimensions and weight
- Length:
- 10 cm
- Length packed:
- 12.3 cm
- Wide:
- 3.4 cm
- Width packed:
- 6.3 cm
- Height:
- 3.8 cm
- Height packed:
- 6.2 cm
- Weight:
- 0.08 kg
- Weight packed:
- 0.138 kg
Reviews
0 from 0 Reviews
Log in
No reviews found. Go ahead and share your insights with others.
Interesting products
Interesting products
AK47 Short Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€97.42
In stock
AK47 Long Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€124.92
In stock
AK47 Medium Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€112.42
In stock
AUG M-LOK Handguard
Clawgear finally brings a versatile and lightweight low profile handguard to the Steyr AUG and same time also introduces M-LOK and Keymod platform to this weapon system. Sophisticated engineered and fully field tested for uncompromising fightability and operator-friendliness. Solid one piece construction, made of hard coated aluminium (Mil-8625-F type III, class II) for perfect combination of low weight and highest mechanical stability. The AUG M-LOK handguard features twelve mounting slots for limitless versatility and does not interfere with most silencers and muzzle devices. Compatibility:Steyr AUG A1/A2, AUG A3 SF, AUG P, AUG Z, AUG LMG variants, AUG SA variants, MSAR STG-556.Does not fit AUG A3, AUG Z A3, AUG 9mm variants
€191.58
In stock
Customers also bought
Customers also bought
AK Rear Sight Mount
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe nine slot Picatinny rail allows the user to upgrade his AK rifle with various aiming devices or accessories.Adjustment ScrewsAdjust the angle of the mount to align it with the point of bullet impact.Shaped ContourThe design fits to the curve on the receiver cover and even allows to dissable the rifle without dismounting the AK RSM.Emergency SightEven with an optical device mounted the sight can be used as a backup.Compatibility: AK-47, AKM, RPK, AK-74 and all variants with the original Mauser-type adjustable rear sight. Not compatible with SKS rifles.Installation: Dismount the existing rear sight and leaf spring. Put the AK RSM into the guidance on the rear sight base and align both holes. Punch the included roll pin into the bore so it is flush with both sides. Insert the big set screw on top into the middle thread on the rail and tighten it until the emergency sight aims to the point of impact. Finally insert both small set screws into the forward threads and tighten them stoutly. Warning: Torque for setscrew max. 3 NM
€74.92
In stock
Sling Swivel 1.25 Inch Stainless Steel
Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsFits Slings with 1.25 Inch webbingBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear
€12.42
In stock
Sling Swivel 1.00 Inch Stainless Steel
Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsFits Slings with 1.00 Inch webbingBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear
€12.42
In stock
AK47 Long Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€124.92
In stock
AK47 Medium Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€112.42
In stock
Sling Swivel Triangle Stainless Steel
Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsTriangle shaped loopBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear
€12.42
In stock