Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Hydration Carrier Core 2L is an insulated hydration carrier pouch for up to 2L water bladders. External Webbing MOLLE allows mounting various pouches and accessories. On the inside is a loop which keeps the bladder in place, so it doesn’t slip down when getting empty.Features:Made of 500D NylonPouch is insulated to maintain the water temperatureInternal Velcro loop for keeping the bladder in placeMOLLE system compatibleFabrics:500D NylonNylon WebbingDimensions:Height: 25cmWidth: 20cmDepth: 2cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear Tourniquet Pouch was designed to give the user easy, ambidextrous access to the Tourniquet. The Pouch can be mounted horizontal or vertical due to its double mounting option (standard MOLLE or double-sided fastener loops). The semi-closed design keeps the Tourniquet safe and prevents it from getting dirty.Features:Designed for common tourniquetsMade of 500D NylonMOLLE system compatibleDouble-sided fastener loops allow horizontal mountingTourniquet accessible from both pouch endsFabrics:500D NylonNylon WebbingDimensions:Height: 14cmWidth: 5,5cmDepth: 3cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear rip-off IFAK is designed to fit most necessary medicaments needed for personal first aid. The pouch is kept secure by two webbing straps connected by a buckle and a velcro on the back of the pouch. The IFAK can be easily detached by opening the buckle and ripping of the pouch. On the inside, there are multiple elastic webbing organizers and flat pockets for med storage. There are also elastic loops and a flat zipped pocket on the outside for additional medical accessories. The IFAK has a large pull handle for fast access when stored in e.g., cargo pockets.Features:Rip-off IFAK pouchMade of 500D NylonMultiple flat inner pockets and elastic webbing organizers for your medsMOLLE system compatibleExternal Safety strap providing secure attachmentExternal flat zipped pocketExternal elastic webbing loopsPouch is fast detachable and kept in place by velcroFabrics:500D NylonWoojin plastic partsNylon WebbingYKK ZipperDimensions:Height: 18cmWidth: 13cmDepth: 8cm

The Raider Mk.IV mission pant has been designed to be simple and lightweight assault pants, featuring extremely useful extras and greatest possible comfort for today's war fighters. It features an improved waist adjustment system with elastic components for better comfort and absorption of body movements. The pocket concept has been optimized; cargo pockets have been extended with an an additional compartment which is accessible from outside and holds a 30rds magazine for rapid access. Profound modifications apply to the knee area which is now equipped with a handy inward knee height adjustment. The modular knee pad compartment allows the use of a wide range of different knee pad inserts from different brands. We particularly recommend the optionally available TRUST HP from D3O which features outstanding knee protection. This pad can be installed via the the button holes which have been integrated for this reason into the pant conception.The Raider Mk.IV Pant's durability and body fit makes this it suitable for all battlefield missions and every day carry as well. The belt area is optimized for rigger & safety belts as well as for suspenders. Front Pockets allow fast and easy access also with gloves. Cargo Pockets provide a lot of space for your equipment and also include an extra zip-pocket. The inside knee area is equipped with a special fabric to provide optimum sweat absorption. 'YKK' zippers and 'Amann' sewing threads have been processed, all main seams are triple stitched for extra durability.Outstanding wearing comfort and anatomic fitOptimized for safety & rigger belts useAdjustable knee-heightIntegrated knee pad compartments (knee pads are available optionally)Triple stitched main seamsReduced infrared signature

Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the AR-15 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: All AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28 TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15, etc. Does not fit Oberland Arms OA-15Installation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.

Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe nine slot Picatinny rail allows the user to upgrade his AK rifle with various aiming devices or accessories.Adjustment ScrewsAdjust the angle of the mount to align it with the point of bullet impact.Shaped ContourThe design fits to the curve on the receiver cover and even allows to dissable the rifle without dismounting the AK RSM.Emergency SightEven with an optical device mounted the sight can be used as a backup.Compatibility: AK-47, AKM, RPK, AK-74 and all variants with the original Mauser-type adjustable rear sight. Not compatible with SKS rifles.Installation: Dismount the existing rear sight and leaf spring. Put the AK RSM into the guidance on the rear sight base and align both holes. Punch the included roll pin into the bore so it is flush with both sides. Insert the big set screw on top into the middle thread on the rail and tighten it until the emergency sight aims to the point of impact. Finally insert both small set screws into the forward threads and tighten them stoutly. Warning: Torque for setscrew max. 3 NM

Specifically designed to extend the MK.III Combat Shirt. The Breacher Hood has wired brim and elasticated toggle adjustments. It attaches quickly and easily using velcro. Prevents debris, dirt and weather from irritating your neck.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.