AK Rear Sight Mount
AK Rear Sight Mount
Item number: 10517406000
In stock, delivered to United Kingdom in 3-5 working days
Your wish lists
Loading...
Will be loaded...
No dealers could be found within a radius of 50km
Enter address:
%place%
Description
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding mater... show more
Features & Details
- Rail system:
- Picatinny Rail
Dimensions and weight
- Length:
- 11.1 cm
- Length packed:
- 12.3 cm
- Wide:
- 1.9 cm
- Width packed:
- 6.3 cm
- Height:
- 2.1 cm
- Height packed:
- 6.2 cm
- Weight:
- 0.056 kg
- Weight packed:
- 0.113 kg
Reviews
0 from 0 Reviews
Log in
No reviews found. Go ahead and share your insights with others.
Interesting products
Interesting products
SG550 Low Profile Mount Base
Clawgear‘s modular mounting system products are designed to increase weapon performance and handling. Due to it‘s construction in 6082 Aluminum, this rugged and high quality item will serve you in any combat situation.NATO STANAG 4694 RAILThe 13 slot Picatinny Rail allows the user to upgrade his 55X rifle with various aiming devices or accessories.LIGHTWEIGHT CONSTRUCTIONAlthough this mount base has been designed in a lightweight way, its mechanical strength is not being affected.ADJUSTMENT SCREWIt clamps the mount for a solid fit between both attachment points on the receiver and is secured by a clamp screw on the left side.DOVETAIL SLOTThe front attachment point is the dovetail on the receiver which is normally used to fix the brass catcher.CompatibilitySIG550, SIG551, SIG552, SIG553, PE90 and all variants of the rifle with standard adjustable diopter sights.InstallationMake sure your weapon is unloaded and safe. Screw the included adjustment screw fully into the mount base. Put the rail on the upper receiver and slide it forward so the dovetail on the receiver connects smoothly to the front of the rail. Then use a 8mm wrench to unscrew the adjustment screw until it moves inside the hole of the rear sight base. Tighten it up for a solid fit. Use the clamp screw on the left side of the mount base to secure its position.
€74.92
In stock
AUG MSM 10 Slot Rail
Clawgear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe 10 slot Picatinny rail allows the user to upgrade his Modular Scope Mount equipped AUG rifle with additional accessories.SurfaceHigh alloy aluminium with anodized coating (MIL-8625-F type III, class II) for heavy use.This rails fits the AUG Modular Scope Mount (Art.Nr. 20114)
€22.42
In stock
AUG A3 Top Rail
Made of high strength aluminum with Mil-Spec Type III hard coat anodized finishFeatures a non-glare coating to reduce reflectionsMakes the A3 rifle compatible with the Clawgear AUG HandguardFeatures a 30 slot picatinny rail (NATO STANAG 4694)Anti-rotational QD attachment point at the front
€127.42
In stock
M-LOK 5 Slot Rail
Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 5 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.
€19.92
In stock
M-LOK 3 Slot Rail
Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 3 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.
€18.25
In stock
Customers also bought
Customers also bought
Sling Swivel 1.00 Inch Stainless Steel
Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsFits Slings with 1.00 Inch webbingBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear
€12.42
In stock
Sling Swivel 1.25 Inch Stainless Steel
Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsFits Slings with 1.25 Inch webbingBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear
€12.42
In stock
AK47 Long Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€124.92
In stock
AK47 Medium Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€112.42
In stock
Sling Swivel Triangle Stainless Steel
Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsTriangle shaped loopBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear
€12.42
In stock
AK47 Gas Tube Cover
The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating
€83.25
In stock