CG15 PARTS

AR15 Gas Block 0.750 The Clawgear AR15 Gas Block 0.750 was developed for professional use where uncompromising precision, durability, and system compatibility are paramount. Its low-profile design allows seamless installation under free-floating handguards without negatively impacting the barrel’s ballistic performance. The construction from non-magnetic, stainless steel ensures high resistance to wear and long service life, even under intense thermal stress during live fire. The gas block is manufactured with tight tolerances to provide optimal sealing at the barrel port and to maximize the efficiency of the gas system. It is available in two finishes: brushed stainless steel for a functional, minimalist appearance, or with a black PVD coating for increased surface hardness, improved wear resistance, and enhanced corrosion protection. These features make the gas block a reliable choice for law enforcement and military users, as well as for professional applications. Technical Specifications MaterialStainless steel (non-magnetic, corrosion resistant) FinishBrushed or PVD-coated (matte black) Weight45 g Length28 mm Width24 mm Height35 mm Inner Diameter19.05 mm

Starblast Flash Hider The Clawgear Starblast Flash Hider was specifically developed for tactical use under low-light conditions. Unlike muzzle brakes, which primarily reduce recoil, this device is focused on effectively suppressing muzzle flash. This significantly reduces the shooter’s visual signature and makes detection more difficult – especially on short-barreled rifles where flash intensity is typically high. The design features weight-optimizing cutouts that ensure maximum durability with minimal weight. The Starblast series is equipped with a NATO A2-compatible interface and is engineered to align concentrically with the bore axis, enabling precise and repeatable use with suppressors. These characteristics make it ideally suited for modern operational profiles in military and law enforcement environments. Technical Specifications TypeFlash Hider InterfaceNATO A2-compatible MaterialHigh-strength steel FinishHard-coated to MIL standards FeaturesWeight-optimized cutouts, short-barrel optimized, suppressor compatible ApplicationMilitary, law enforcement, tactical use

CG15 MIL-SPEC BUFFER TUBE The Clawgear CG15 MIL-SPEC Buffer Tube is designed for demanding shooters who accept no compromises. Manufactured from high-strength 7075-T6 aircraft-grade aluminum, this buffer tube delivers exceptional durability, stability, and precision engineering for flawless weapon function. By strictly adhering to MIL-SPEC tolerances, the CG15 Buffer Tube ensures an almost play-free fit for premium stocks from manufacturers such as Magpul or Clawgear. Cheaper, non-standard stocks may lead to fitment issues – a risk we deliberately eliminate for our professional customers. The surface is hard anodized in matte black to minimize reflections while providing outstanding corrosion resistance and wear protection. With six adjustment positions, the CG15 Buffer Tube allows for precise length customization to match different shooting stances and gear configurations. Focus on What Matters High-Quality Material: Manufactured from 7075-T6 aircraft-grade aluminum for maximum durability and structural integrity. Hard-Anodized Finish: Rugged matte black coating for superior corrosion resistance and reduced light reflection. Optimized Ergonomics: Six-position adjustability for a customized length-of-pull. Precision Fit: Minimizes unwanted movement and enhances accuracy in dynamic shooting situations. Technical Specifications – CG15 MIL-SPEC BUFFER TUBE Weight120 g Length185 mm Width37.2 mm Height29.2 mm CompatibilityAR15 Mil-Spec Lower Whether in competition or professional use, the Clawgear CG15 MIL-SPEC Buffer Tube stands out with uncompromising quality, precision craftsmanship, and a clear focus on maximum performance.

CG15 HANDGUARD The Clawgear CG15 Handguard is designed for shooters who demand the highest precision and flexibility. Available in two lengths – 9.5 inches and 13.5 inches – this free-floating handguard is the optimal choice for various barrel lengths and applications. With its lightweight yet highly durable construction, the CG15 Handguard is perfect for tactical, military, and competitive use. The STANAG 4694 Picatinny top rail and M-LOK interfaces at 45° and 90° angles allow for the flexible and secure mounting of accessories such as lasers, lights, and vertical grips. Made from high-strength aluminum and finished with a matte black hard-anodized coating, this handguard offers maximum corrosion resistance and durability. Installing the CG15 Handguard on an AR15 requires changing the barrel nut. The necessary barrel nut, made from hardened steel, is included in the package to ensure a reliable and precise installation. Focus on What Matters Optimal Length Options: Available in 9.5 inches and 13.5 inches to fit various AR15 barrel lengths. Free-Floating Design: Reduces barrel interference and enhances accuracy. Enhanced M-LOK Interfaces: Compatible with all M-LOK accessories following Magpul standards. High-Quality Construction: Made from hardened aluminum for maximum durability and wear resistance. Easy Installation: The included hardened steel barrel nut allows for secure mounting. Versatile Applications: Ideal for tactical, law enforcement, and competitive shooting scenarios. Technical Specifications – CG15 HANDGUARD Model9.5 inches13.5 inches Weight350 g420 g Length9.5 inches (241 mm)13.5 inches (343 mm) Width39 mm Height51.5 mm CompatibilityAR15 Mil-Spec Upper Whether for dynamic operations or competitive shooting, the Clawgear CG15 Handguard delivers outstanding stability, ergonomic excellence, and uncompromising precision.

CG15 STOCK The Clawgear CG15 Stock is specifically designed for demanding AR15 shooters who refuse to compromise on ergonomics and durability. With its tool-free installation and variable length adjustment, this stock allows for perfect customization to suit different shooting positions and gear setups. Manufactured to strict Mil-Spec standards, the CG15 Stock fits snugly onto a Clawgear Buffer Tube, ensuring improved control and enhanced accuracy, especially in dynamic shooting situations. Constructed from fiber-reinforced polymer, the CG15 Stock offers exceptional resistance to impacts and wear. The ventilated buttpad effectively absorbs recoil, allowing for a more stable shooting position and faster follow-up shots. Enhanced QD sling attachment points at the rear of the stock provide versatile sling mounting options, further increasing flexibility and comfort. Focus on What Matters Adjustable Length: Variable length adjustment for optimal fit and comfort. Ergonomic Design: Provides a stable shoulder support for improved control and accuracy. Durable Construction: Made from fiber-reinforced polymer for maximum durability and impact resistance. Effective Recoil Absorption: The ventilated buttpad reduces recoil and enhances firearm stability. QD Sling Mounts: Extended QD attachment points at the rear of the stock allow for flexible sling configurations. Technical Specifications – CG15 STOCK Weight300 g Length195 mm Width40 mm Height125 mm CompatibilityAR15 Mil-Spec Buffer Tube Whether for competition or professional use, the Clawgear CG15 Stock stands out with uncompromising quality, ergonomic optimization, and maximum performance.

Starblast Hybrid Compensator – 1/2"-28 UNEF The Clawgear Starblast Hybrid Compensator combines the functions of flash hider, muzzle brake, and compensator in a single device. This hybrid design effectively reduces recoil and muzzle rise while suppressing flash. The result is improved weapon control during rapid follow-up shots and in tactical environments. Manufactured from high-strength steel, the compensator features structural cutouts for weight reduction. The matte, non-reflective surface finish supports use under varying light conditions. The A2-compatible interface allows direct attachment of standard NATO QD suppressors such as the B&T Rotex V, Steyr UMS, or B&T Blast Deflector. This variant is designed for AR15 platforms with 1/2"-28 UNEF barrel threads and is compatible with all common .223 Rem / 5.56 mm rifles such as Hera Arms The 15th, Schmeisser AR15, DPMS AR-15, or Steyr STM556. Not compatible with Oberland Arms OA-15. Technical Specifications TypeHybrid compensator (brake / compensator / flash hider) MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) InterfaceNATO A2 compatible (e.g. B&T Rotex V, Steyr UMS) Mounting MethodDirect thread installation with 1/2"-28 UNEF Thread1/2"-28 UNEF Caliber.223 Rem / 5.56 mm CompatibilityAll standard AR15/M16 platforms with 1/2"-28 thread (not for OA-15)

AR15 Ambidextrous Safety Selector The Clawgear AR15 ambidextrous safety selector is designed for professional military and law enforcement applications. Manufactured from high-grade steel in accordance with MilSpec standards, it provides long-term reliability and consistent function under demanding operational conditions. The symmetrical design allows for fast and intuitive operation by both left- and right-handed users. The safety position is clearly tactile and visible on both sides, enhancing situational awareness and ensuring safe handling, even under stress. The selector is compatible with all standard AR15 lower receivers. Technical Specifications TypeAmbidextrous safety selector PlatformAR15 / M4 MaterialSteel, MilSpec compliant FinishCorrosion-resistant coating (black) OperationAmbidextrous, suitable for left- and right-handed users CompatibilityStandard AR15 lower receivers

SOF Compensator – 1/2"-28 UNEF The Clawgear SOF Compensator was developed for AR15 platforms to improve weapon control in demanding operational environments. It significantly reduces recoil and muzzle rise, providing better control and precision—especially during rapid fire and dynamic engagements. The closed bottom prevents dust signature during prone shooting, while the expansion port geometry vents gases upward and to the sides, maintaining muzzle stability. Manufactured from hardened high-strength steel, the device is built to withstand extreme thermal and mechanical stress. A key feature is the integrated breacher spike front, allowing forced entry through doors or barriers in CQB operations. Installation is done using the included crush washer and a 19 mm wrench. The A2-compatible interface allows attachment of NATO QD suppressors such as the B&T Rotex V or Steyr UMS. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHardened high-strength steel FinishCorrosion-resistant hard coating Thread1/2"-28 UNEF Caliber.223 Rem / 5.56 mm CompatibilityAll AR15/M16 platforms with 1/2"-28 UNEF (not compatible with OA-15) FeaturesClosed bottom, expansion port, breacher spikes, A2-compatible (QD-ready) InstallationMounted with crush washer, 19 mm wrench required

Two Chamber Muzzle Brake – 1/2"-28 UNEF The Clawgear Two Chamber Muzzle Brake is designed for AR15 platforms and features a dual-chamber construction to significantly reduce recoil and improve weapon stability. It enhances precision and control during rapid fire in tactical environments. Manufactured from high-strength steel and finished with a non-reflective hard coating, it withstands thermal and mechanical stress. The closed bottom prevents dust signature when shooting prone, and the closed top reduces gas distraction in the line of sight. NATO A2 compatibility allows for use with B&T QD suppressors such as the Rotex-V or Steyr UMS. This version is compatible with AR15/M16 systems using a 1/2"-28 UNEF barrel thread. It is mounted using the included crush washer for precise alignment. Not compatible with Oberland Arms OA-15. Technical Specifications TypeTwo-chamber muzzle brake MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) Mounting MethodCrush washer (included) Thread1/2"-28 UNEF Caliber.223 Rem / 5.56 mm FeaturesClosed bottom and top, B&T QD compatible CompatibilityAR15/M16 with 1/2"-28 UNEF (not for OA-15) Length59 mm Diameter21.93 mm Weight85 g

Blast Forward Compensator – AR15 The Clawgear Blast Forward Compensator (BFC) is a linear muzzle device specifically designed for AR15 platforms with 1/2 x 28 TPI UNEF thread. By redirecting muzzle gases forward, it significantly reduces side-blast, sound pressure, and gas exposure for the shooter and nearby personnel—especially in confined spaces, CQB environments, or on the firing line. The closed-body design features three consecutive expansion chambers that efficiently mitigate recoil and muzzle rise. Integrated hardened steel breacher spikes provide additional utility in close-quarters applications such as forced entry. The compensator is mounted using the included crush washer, ensuring proper alignment with the bore axis. Technical Specifications TypeLinear Blast Forward Compensator MaterialHardened high-strength steel FinishBlack, corrosion-resistant coating Expansion Chambers3 internal chambers Breacher SpikesIntegrated, hardened steel Thread1/2 x 28 TPI UNEF Caliber.223 Rem / 5.56 x 45 mm NATO CompatibilityAll AR-15 / M16 variants with matching thread (e.g. Hera Arms The 15th, Schmeisser AR15, DPMS AR-15); not compatible with OA-15 InstallationVia included crush washer, tighten using 19 mm wrench or dedicated tool

Flip-Up Sight Set The Clawgear Flip-Up Sight Set is a folding mechanical sight system for weapon platforms with continuous Picatinny rails. It is in operational use with law enforcement and military users in multiple countries and was designed for maximum reliability, ruggedness, and ease of use. Both front and rear sights are precision-machined from high-strength steel and finished with a non-reflective, light-absorbing surface treatment. When folded, the sights sit low-profile and remain unobtrusive during transport or storage. They can be deployed quickly and adjusted without tools—elevation at the front, windage at the rear. Compatible with MIL-STD-1913 and STANAG 4694 rail systems, the set fits all standard platforms. Technical Specifications TypeMechanical flip-up sight (front and rear) PlatformMIL-STD-1913 / STANAG 4694 Picatinny MaterialHigh-strength, corrosion-resistant steel FinishNon-reflective, light-absorbing hard coating AdjustmentTool-free – front elevation, rear windage FunctionFolding, locking, low-profile when stowed CompatibilityAll common platforms with continuous Picatinny rail Dimensions & Weight ModelWeightLengthWidthHeight Front Sight59 g53 mm35 mm38.6 mm Rear Sight71 g46.5 mm38 mm40.5 mm

CG15 Magazine 10 Rounds – AR15 The Clawgear CG15 10-round magazine is designed for civilian users, particularly sport shooters and hunters. Its compact design complies with magazine capacity regulations in many European countries, making it ideal for competitions, training, and hunting applications where legal limitations apply. Made from fiber-reinforced polymer, the magazine offers high durability at a low weight. A consistently curved internal geometry, durable steel spring, and textured baseplate ensure reliable feeding and efficient handling even under challenging conditions on the range or in the field. Technical Specifications Type10-round magazine for AR15/M4 platforms Capacity10 rounds (5.56×45 mm NATO / .223 Rem) MaterialFiber-reinforced polymer SpringHigh-strength steel CompatibilityAll rifles with NATO/STANAG 4179 magazine wells BaseplateErgonomic, slip-resistant, tool-free disassembly FeaturesCompliant with capacity limits in many countries, ideal for sport and hunting ColorBlack

5.56 Extended Magazine Base The Clawgear Extended Magazine Base provides civilian shooters with a practical solution to improve magazine handling while staying compliant with legal 10-round magazine capacity limits. By replacing the floor plate of a PMAG 10 GEN M3 from Magpul, this extension enhances ergonomics, grip, and reloading control – especially under stress or during dynamic drills. Its extended design improves draw from magazine pouches and allows for better control during reloads. Made of fiber-reinforced polymer with 15 % glass fiber content, it offers long-lasting durability for training and competitive use. Note: Not compatible with Clawgear CG15 magazines. Technical Specifications TypeExtension base for 10-round PMAG GEN M3 MaterialPolymer with 15 % glass fiber reinforcement FunctionExtends grip area, improves reload handling CompatibilityMagpul PMAG 10 GEN M3 CapacityRemains compliant (10 rounds) InstallationTool-free floorplate replacement Weight80 g Dimensions (L×W×H)70 × 31 × 105 mm ColorBlack