SG550 Low Profile Mount Base

SG550 Low Profile Mount Base

Item number: 10549106000
Color: Black

In stock

Find local dealer
Determine location Open Store Locator
Dealers near:
No dealers could be found within a radius of 50km
Enter address:

Description

Clawgear‘s modular mounting system products are designed to increase weapon performance and handling. Due to it‘s construction in 6082 Al... show more

Features & Details

Rail system:
Picatinny Rail
Scope of delivery:
Allen key, Instruction manual

Dimensions and weight

Length:
15.1 cm
Length packed:
21.9 cm
Wide:
2.1 cm
Width packed:
8.6 cm
Height:
1.5 cm
Height packed:
6.6 cm
Weight:
0.053 kg
Weight packed:
0.148 kg

Reviews

0 from 0 Reviews

Give us a rating!

Share your experience with other customers.

Interesting products

Interesting products

Clawgear AUG A3 Top Rail
AUG A3 Top Rail
Made of high strength aluminum with Mil-Spec Type III hard coat anodized finishFeatures a non-glare coating to reduce reflectionsMakes the A3 rifle compatible with the Clawgear AUG HandguardFeatures a 30 slot picatinny rail (NATO STANAG 4694)Anti-rotational QD attachment point at the front
€152.90

In stock

Clawgear AK Rear Sight Mount
AK Rear Sight Mount
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe nine slot Picatinny rail allows the user to upgrade his AK rifle with various aiming devices or accessories.Adjustment ScrewsAdjust the angle of the mount to align it with the point of bullet impact.Shaped ContourThe design fits to the curve on the receiver cover and even allows to dissable the rifle without dismounting the AK RSM.Emergency SightEven with an optical device mounted the sight can be used as a backup.Compatibility: AK-47, AKM, RPK, AK-74 and all variants with the original Mauser-type adjustable rear sight. Not compatible with SKS rifles.Installation: Dismount the existing rear sight and leaf spring. Put the AK RSM into the guidance on the rear sight base and align both holes. Punch the included roll pin into the bore so it is flush with both sides. Insert the big set screw on top into the middle thread on the rail and tighten it until the emergency sight aims to the point of impact. Finally insert both small set screws into the forward threads and tighten them stoutly. Warning: Torque for setscrew max. 3 NM
€89.90

In stock

Clawgear SG550 High Profile Mount Base
SG550 High Profile Mount Base
Clawgear‘s modular mounting system products are designed to increase weapon performance and handling. Due to it‘s construction in 6082 Aluminum, this rugged and high quality item will serve you in any combat situation.NATO STANAG 4694 RAILThe 13 slot Picatinny Rail allows the user to upgrade his 55X rifle with various aiming devices or accessories.LIGHTWEIGHT CONSTRUCTIONAlthough this mount base has been designed in a lightweight way, its mechanical strength is not being affected.ADJUSTMENT SCREWIt clamps the mount for a solid fit between both attachment points on the receiver and is secured by a clamp screw on the left side.DOVETAIL SLOTThe front attachment point is the dovetail on the receiver which is normally used to fix the brass catcher.AIMING BOREMakes the use of the original diopter sights possible.CompatibilitySIG550, SIG551, SIG552, SIG553, PE90 and all variants of the ri? e with standard adjustable diopter sights.InstallationMake sure your weapon is unloaded and safe. Screw the included adjustment screw fully into the mount base. Put the rail on the upper receiver and slide it forward so the dovetail on the receiver connects smoothly to the front of the rail. Then use a 8mm wrench to unscrew the adjustment screw until it moves inside the hole of the rear sight base. Tighten it up for a solid fit. Use the clamp screw on the left side of the mount base to secure its position.
€124.90

In stock

Clawgear AUG MSM 4 Slot Rail
AUG MSM 4 Slot Rail
Clawgear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe 4 slot Picatinny rail allows the user to upgrade his Modular Scope Mount equipped AUG rifle with additional accessories.SurfaceHigh alloy aluminium with anodized coating (MIL-8625-F type III, class II) for heavy use.This rails fits the AUG Modular Scope Mount (Art.Nr. 20114)
€16.90

In stock

Clawgear AUG Modular Scope Mount
AUG Modular Scope Mount
Clawgear‘s modular mounting system products are designed to increase weapon performance and accuracy. Due to its glass fibre reinforced polymer construction, this rugged and high quality item will serve you in any combat situation. The Modular Scope Mount protects the original optics of AUG rifles and provides mounting possibilites for various Picatinny based accessories.NATO STANAG 4694 RailThe integrated 16 slot Picatinny Rail allows the user to upgrade his AUG rifle with various aiming devices or accessories.Lightweight ConstructionAlthough this mount base has been designed in a lightweight way, its mechanical strength is enhanced by the use of glass fiber reinforced polymer.Mounting PossibilitesAdditional side rails (sold seperately) can be attached to both sides of the AUG MSM to provide additional mounting spots for further equipment.Reduced Infrared SignatureThis accessory part features reduced infrared singature.Flip-Up CoversTwo flip-up covers (included) protect the lenses of the scope from rain, dust, debris and mud.InstallationMake sure your weapon is unloaded and safe. Take the left half-shell (the one without top rail) and place it on the scope by pushing it over the diagonal fixing screw of the scope. Then push the right half-shell into the corresponding slots on the left part until it clicks in. Make sure that all engagement hooks are snapped in. Place each hexagon nut in the clearance of the right shell and tighten the corresponding screw from the left shell side. Mount the included flip-up covers to protect the original scope glass.CompatibilitySteyr AUG A1/A2, AUG P, AUG Z, AUG LMG variants, AUG SA variants, F88 Austeyr. Applies to all variants with 1,5x standard Steyr scope.
€129.90

In stock

Customers also bought

Customers also bought

Clawgear Mk.II Instructor Shirt
Mk.II Instructor Shirt
The Instructor Shirt has been developed for use at shooting ranges and training facilities. We designed this unique shirt to fulfil requirements of comfort and utilitarian configuration. The Instructor Shirt is exceptionally versatile in its capacities. It features velcro mounting points and zip pockets on both sleeves. A hidden side pocket for mobile phone including cable outlet has also been included.
€49.90

Partially stocked

Sale
Clawgear CIL Jacket
CIL Jacket
In the CIL we have conceived an extremely light and versatile warm layer with excellent performance and low stowage requirement. Climashield Apex (67 gsm) is a insulation material which has been well tested and used militarily. This feather light material has a high resistance to tearing, good moisture transfer qualities and can still be packed in a tiny space.Ultra light design for maximum performanceClimashield Apex (67 gsm) insulationElastic cuffs on armsRoomy front pocketsFolds into its own envelopeShell is made of low noise micro rip stop nylon fabric
€79.90 €129.90

In stock

Clawgear Merino Seamless Shirt SS
Merino Seamless Shirt SS
The CLAWGEAR® Strata base layer is the first line of defense in cold weather and high-output activities. The “longbody” design ensures skin cover is maintained in a full range of movement. The intimate blend of Polyamide forstrength and natural Merino wool provides durability and comfort for the user. The inclusion of elastane allows anintimate fit for maximum wicking and breathability.The shirt is available in long and short-sleeve configurations and features quick-drying, anti-microbial material withstretch for an unrestricted range of movement and comfort.TECHNICAL FEATURES• Polyamide/Merino Wool/Elastane• Long or short sleeve options• Crew neck• Seamless construction with 4-way stretch• Quick drying & lightweight• Mapped knit zones chest, underarms, and sleeves• Double thickness hems• CLAWGEAR® logo on chest• Knitted care instructions
€74.90

In stock

D3O P12 Elbow Pad
P12 Elbow Pad
€16.90

In stock

Clawgear Merino Seamless Shirt LS
Merino Seamless Shirt LS
The CLAWGEAR® Strata base layer is the first line of defense in cold weather and high-output activities. The “longbody” design ensures skin cover is maintained in a full range of movement. The intimate blend of Polyamide forstrength and natural Merino wool provides durability and comfort for the user. The inclusion of elastane allows anintimate fit for maximum wicking and breathability.The shirt is available in long and short-sleeve configurations and features quick-drying, anti-microbial material withstretch for an unrestricted range of movement and comfort.TECHNICAL FEATURES• Polyamide/Merino Wool/Elastane• Long or short sleeve options• Crew neck• Seamless construction with 4-way stretch• Quick drying & lightweight• Mapped knit zones chest, underarms, and sleeves• Double thickness hems• CLAWGEAR® logo on chest• Knitted care instructions
€89.90

In stock