Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 3 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.

Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 5 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.

Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 7 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.

Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 9 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.*

RAIL M-LOK INCLINÉ À 45 DEGRÉS

• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish

• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish

• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish

The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating

Picatinny Rail for M-LOK with QD mounting pointFeature List:• Picatinny Rail for M-LOK interface with 10 slots•Integrated QD mounting for Sling Swivel• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening if no Torque Wrench is avalible

Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsFits Slings with 1.00 Inch webbingBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear

RAIL KEYMOD INCLINÉ À 45 DEGRÉS