AK47 Short Slick Handguard M-LOK

AK47 Short Slick Handguard M-LOK

Item number: 11082406000
Color: Black

In stock

Find local dealer
Determine location Open Store Locator
Dealers near:
No dealers could be found within a radius of 50km
Enter address:

Description

• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting... show more

Features & Details

Rail system:
M-Lok

Dimensions and weight

Length:
16.4 cm
Length packed:
22 cm
Wide:
4.5 cm
Width packed:
8.5 cm
Height:
4 cm
Height packed:
6.6 cm
Weight:
0.16 kg
Weight packed:
0.257 kg

Reviews

0 from 0 Reviews

Give us a rating!

Share your experience with other customers.

Interesting products

Interesting products

Clawgear AUG M-LOK Handguard
AUG M-LOK Handguard
Clawgear finally brings a versatile and lightweight low profile handguard to the Steyr AUG and same time also introduces M-LOK and Keymod platform to this weapon system. Sophisticated engineered and fully field tested for uncompromising fightability and operator-friendliness. Solid one piece construction, made of hard coated aluminium (Mil-8625-F type III, class II) for perfect combination of low weight and highest mechanical stability. The AUG M-LOK handguard features twelve mounting slots for limitless versatility and does not interfere with most silencers and muzzle devices. Compatibility:Steyr AUG A1/A2, AUG A3 SF, AUG P, AUG Z, AUG LMG variants, AUG SA variants, MSAR STG-556.Does not fit AUG A3, AUG Z A3, AUG 9mm variants
€229.90

In stock

Clawgear AK47 Long Slick Handguard M-LOK
AK47 Long Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€149.90

In stock

Clawgear AK47 Medium Slick Handguard M-LOK
AK47 Medium Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€134.90

In stock

Clawgear AK47 Gas Tube Cover
AK47 Gas Tube Cover
The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating
€99.90

In stock

Customers also bought

Customers also bought

Clawgear AK Rear Sight Mount
AK Rear Sight Mount
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe nine slot Picatinny rail allows the user to upgrade his AK rifle with various aiming devices or accessories.Adjustment ScrewsAdjust the angle of the mount to align it with the point of bullet impact.Shaped ContourThe design fits to the curve on the receiver cover and even allows to dissable the rifle without dismounting the AK RSM.Emergency SightEven with an optical device mounted the sight can be used as a backup.Compatibility: AK-47, AKM, RPK, AK-74 and all variants with the original Mauser-type adjustable rear sight. Not compatible with SKS rifles.Installation: Dismount the existing rear sight and leaf spring. Put the AK RSM into the guidance on the rear sight base and align both holes. Punch the included roll pin into the bore so it is flush with both sides. Insert the big set screw on top into the middle thread on the rail and tighten it until the emergency sight aims to the point of impact. Finally insert both small set screws into the forward threads and tighten them stoutly. Warning: Torque for setscrew max. 3 NM
€89.90

In stock

Clawgear Sling Swivel 1.00 Inch Stainless Steel
Sling Swivel 1.00 Inch Stainless Steel
Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsFits Slings with 1.00 Inch webbingBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear
€14.90

In stock

Clawgear Sling Swivel 1.25 Inch Stainless Steel
Sling Swivel 1.25 Inch Stainless Steel
Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsFits Slings with 1.25 Inch webbingBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear
€14.90

In stock

Clawgear AK47 Medium Slick Handguard M-LOK
AK47 Medium Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€134.90

In stock

Clawgear Sling Swivel Triangle Stainless Steel
Sling Swivel Triangle Stainless Steel
Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsTriangle shaped loopBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear
€14.90

In stock

Clawgear AK47 Gas Tube Cover
AK47 Gas Tube Cover
The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating
€99.90

In stock