AK47 Long Slick Handguard M-LOK

AK47 Long Slick Handguard M-LOK

Item number: 11082506000
Color: Black

In stock

Find local dealer
Determine location Open Store Locator
Dealers near:
No dealers could be found within a radius of 50km
Enter address:

Description

• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting... show more

Features & Details

Rail system:
M-Lok

Dimensions and weight

Length:
37.2 cm
Length packed:
45.5 cm
Wide:
4.8 cm
Width packed:
6.2 cm
Height:
4.8 cm
Height packed:
6 cm
Weight:
0.25 kg
Weight packed:
0.296 kg

Reviews

0 from 0 Reviews

Give us a rating!

Share your experience with other customers.

Interesting products

Interesting products

Clawgear AUG M-LOK Handguard
AUG M-LOK Handguard
Clawgear finally brings a versatile and lightweight low profile handguard to the Steyr AUG and same time also introduces M-LOK and Keymod platform to this weapon system. Sophisticated engineered and fully field tested for uncompromising fightability and operator-friendliness. Solid one piece construction, made of hard coated aluminium (Mil-8625-F type III, class II) for perfect combination of low weight and highest mechanical stability. The AUG M-LOK handguard features twelve mounting slots for limitless versatility and does not interfere with most silencers and muzzle devices. Compatibility:Steyr AUG A1/A2, AUG A3 SF, AUG P, AUG Z, AUG LMG variants, AUG SA variants, MSAR STG-556.Does not fit AUG A3, AUG Z A3, AUG 9mm variants
€229.90

In stock

Clawgear AK47 Short Slick Handguard M-LOK
AK47 Short Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€116.90

In stock

Clawgear AK47 Medium Slick Handguard M-LOK
AK47 Medium Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
€134.90

In stock

Clawgear AK47 Gas Tube Cover
AK47 Gas Tube Cover
The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating
€99.90

In stock

Customers also bought

Customers also bought

Clawgear AK Two Chamber Compensator
AK Two Chamber Compensator
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality made item will serve you in any situation.B&T Quick DetachAllows the operator to enhance the weapon system with B&T QD (Rotex-V) suppressors.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Mounting NotchesTwelve mounting grooves allow the compensator to fit on any AK based weapon system.Closed BottomPrevents blown up dust and debris.Closed TopPrevents distraction in the line of sight.Compatibility: AK-47, AKM, RPK, AK-74 and all variants based on these models with 14x1 LH muzzle thread. Does not fit on AK-100 series, AKS-74U, Saiga riflesInstallation: Make sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the compensator counterclockwise on the barrel and push the locking pin on the front sight base completely flat. Screw thecompensator tight and release the locking pin into the next mounting notch available. Before using a silencer make sure the compensator is not moving at all.
€84.90

In stock

Barrel thread: 14mm CCW
Clawgear Snap Cap 7,62x39 2-pack
Snap Cap 7,62x39 2-pack
€13.90

In stock

Clawgear Sling Swivel Triangle Stainless Steel
Sling Swivel Triangle Stainless Steel
Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsTriangle shaped loopBody and Plunger made from Stainless SteelChrome Stainless Steel ball bearingsBlack oxide finish to achieve a highly abrasion resistant surfaceRecessed Plunger to prevent accidental release and minimise snagging on gear
€14.90

In stock

Clawgear AK47 Gas Tube Cover
AK47 Gas Tube Cover
The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating
€99.90

In stock

Clawgear Merino Seamless Neck Gaiter Long
Merino Seamless Neck Gaiter Long
The CLAWGEAR® Strata Neck Gaiters are designed to provide lightweight, packable, cold-weather protection. TheStrata Neck Gaiter in STANDARD length provides neck and lower jaw coverage while the EXTENDED option can beworn as a double layer in very cold environments or as a single layer providing coverage to eye level to the front andhead crown to the rear.The stretch properties and lightweight provide limitless wearing options depending on the task, and tacticalrequirements, and with minimal storage and weight burden.TECHNICAL FEATURES• Polyamide/Merino Wool/Elastane• Seamless tube construction• Double-thickness tube ends• Knitted CLAWGEAR® logo front & centre• Knitted care instructions
€32.90

Currently not in stock

Clawgear Mk.II Instructor Shirt LS
Mk.II Instructor Shirt LS
Inspired by the popularity of the Mk.II Instructor Shirt, the long sleeve version has been developed as an extremely versatile shirt, primarily worn on the range and for instructional duties. However, due to its versatility, it is also suitable for a variety of other tasks, including light operational duties. The very comfortable fabric of the torso also provides a very high wearing comfort under plate carriers.The technical cut of the sleeves made of very durable, stretchy and water-repellent material ensures an extremely high freedom of movement. The two upper arm pockets provide ample storage space, while the flap areas offer space for ID badges and two slip-in pockets each for writing utensils.Clear pockets on the upper armsDurable fabric with great comfortExtralong torso to prevent slipping out of the pantsFast drying, breathable and comfortableExcellent comfort and light weight.
€74.90

In stock